The Pud Pro™ is an integrated, fully enclosed back country packing system designed to haul your gear behind an ATV, UTV or snowmobile. It keeps your gear secure, clean and dry. It has enough room for a family camping trip, a fun day at your favorite spot or can be used for a hunting expedition. The Pud Pro™ can travel over land, over snow and can be used as a small boat. The easy-to-use attachment system allows you to convert the Pud Pro™ from one function to another in a matter of seconds.

The Pud Pro™ Shell

The Pud Pro™ Shell is a rigid, insulated, weatherproof, clam shell container. The shell halves are molded with a continuous inner and outer wall filled with ridged, closed-cell foam insulation to form a completely enclosed unit. The exterior walls are reinforced with strategic ridges along the sides and on the top and bottom. An integrated piano hinge with an aluminum pin connects the two halves. The Pud Pro™ closes securely on a weatherproof gasket and is held in place with two locking clasps.

The Pud Pro™ top and bottom halves can easily be separated by sliding out the aluminum hinge pin. Once separated, they can be linked together to double the sled capacity when pulled behind a snowmobile. A connector harness is available separately to pull both halves behind a snowmobile. Made in the USA.

• Width: 35″  •  Height: 29.5″  •  Length: 72.5″
• Weight: 98 lbs
• Cargo: 18.6 cu.ft.

Trailer Adapter

Connects to your existing trailer (or a separately purchased trailer) to secure the Pud Pro™ shell. Once bolted or welded to your trailer, uses two connection pins to attach the Pud Pro™ shell. The adaptor folds flat when not in use so your trailer can be used for other purposes. All steel construction with full welds. Fits most trailers and is a great way to build a budget back country trailer with the best shell on the market. Made in the USA.

Trailer Model AT

High 15 1/2″ Clearance

Fully street legal and trail ready. 6-ply radial tires, 4.5 inch sidewalls. Modular wheels, 21 X 4.5 X 12, 4×4 bolt pattern, rated at 1,045 lbs per wheel. Independent torsion suspension axles, molded wheel fenders, 2” ball hitch and flip-down stand. Full wire harness with 4 pin flat connector with lifetime-guaranteed sealed LED lighting package. Powder coated black hammered finish. Easy-to-use attachment system tightly secures the Pud Pro™ Shell at two points so it can be easily connected and removed in a matter of seconds. Assembly required. Center beam 2.5″ x 2.5″ powder coated steel, Side beams 2.5″ x 1.5″ powder coated steel. Length: 97″ – 126″ (adjustable tongue), Width: 43.5″, Height: 44″. Weight: 186lbs. Made in the USA.

Trailer Model BC

High 15″ Clearance

Designed for off-road use. Tires are low pressure, belted, knobby tread. Designed for speeds up to 40mph. Wheels are 22 X 11 X 8″, 4×4 bolt pattern and rated at 345 lbs per wheel. Rigid steel axle, steel wheel fenders, 2” ball hitch and flip-down stand. Powder coated black hammered finish. Easy-to-use attachment system tightly secures the Pud Pro™ Shell at two points so it is easily connected and removed in a matter of seconds. Assembly required. Center beam 2.5″ x 2.5″ powder coated steel, Side beams 2.5″ x 1.5″ powder coated steel. Length: 97″ – 126″ (adjustable tongue), Width: 43.5″, Height: 44″. Weight: 173lbs. Made in the USA.

Snowmobile Harness

The tow bar assembly connects your Pud Pro™ shell to a snowmobile. The assembly includes a universal snowmobile hitch that can be bolted onto your snowmobile rear bar. Accepts a 3/8″ lynch pin (included). Used in conjunction with the Snowmobile Hitch part (included). Made in USA.